Shenzhen Hoion Lighting Co.,Ltd
Products

led wall dimmer switch 12v LED Dimmer Wall Switch

HX-SZ100-WP-DIM LED Dimmer with RF wireless full touch wall panel HX-SZ100-WP-DIM, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt full touch RF wall-panel remote control. 5 function buttons and 1 dimming ring...

    HX-SZ100-WP-DIM
    LED Dimmer with RF wireless full touch wall panel

    HX-SZ100-WP-DIM, adopt the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. Adopt full touch RF wall-panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value. There are 3 dynamic modes in the mode button, and the speed is adjustable. Further, it can be easily connected by RJ45 to achieve all units work synchronization.

    Product Feature

    ●Adopt PWM technology, smooth and flicker-free.
    ●Adopt full touch RF wall-panel remote control. 5 function buttons and 1 dimming ring in the center, all buttons are in the touch form, and the dimming ring has 128 levels in different brightness value.
    ●High watt output design, up to 300W.
    ●Easy connection to achieve multiple dimmers sync-work by RJ45 terminal.
    ●2-year warranty.

    Technical Parameters

    Receiver (HX-SZ100 (DIM)):

    Working temperature

    -20-60℃

    Supply voltage

    DC12V~24V

    Output

    3 channels(Sync)

    External dimension

    L127*W41*H32 (mm)

    Packing size

    L49*W39*H143 (mm)

    Net weight

    150g

    Gross weight

    170g

    Output gray

    256 levels

    Max. Output current

    <25A

    Max. Output power

    300W

    Wall-panel remote control (HX-SWB-DIM):

    Working voltage

    AC90-265V(50/60Hz)

    RF frequency

    433.92MHz

    Transmission distance

    up to 30m(the deviation depend on the environment)

    Working power

    <2W

    Standby power

    <0.2W

    Ambient temperature

    0-45℃

    Dimension

    86*86*40mm

    Packing dimension

    L89*W40*H89mm

    N.W

    130g

    G.W

    140g

    Output power

    12V:<144W,24V:<288W

    Interface Specifications



    Wall-panel Installation Method

    1)Opening: Gently pry gaps in touch panel with a screwdriver, and remove the panel slowly, as shown below:

    2)Unplug the connector, connect the power cord, and fix the base part in the 86*86 installation box ( user need to prepare the installation box by themselves) on the wall with screws.

    3)Reconnect the two parts of panel, and cover the face part on the base part to complete the installation.

    Direction for use

    Adopts RF full touch control, with one dimming ring and 5 function buttons.

    The function of each button as below:

    Name of key

    Instruction

    Remarks

    ON

    ON in any time


    Off

    OF LEDs in any time


    Mode

    The mode will move to next, when touch the key each time

    3 modes in total.

    Speed/Brightness +

    The Speed/Brightness will +1, whentouch the key each time

    Speed for dynamic modes, Brightness for static modes.

    Speed/Brightness -

    The Speed/Brightness will -1, when touch the key each time

    Speed for dynamic modes, Brightness for static modes.

    Dimming Ring

    Touch any brightness which you want


    3 modes in total as below:

    NO

    Patterns

    Remarks

    1

    Static 100% light

    Brightness is adjustable, speed is unadjustable

    2

    flash

    Speed is adjustable, brightness is unadjustable

    3

    fade

    Important: As RF signal sender, pair the wall panel to the receiver before use. The operation instruction as below:

    1.Step 1: Press and hold the "Mode" key before the "RF LED Driver" powering on, the RF signal light lights red. And power up the "RF LED Driver", and the LEDs will output 50% brightness (Tip: if the output does not output 50% brightness, indicating that the code learning is not successful, need to repeat the step 1).
    2.Step 2: Press the "ON" key, then the LEDs will be 25% brightness.
    3.Step 3: Press the "Mode" key again, then the LEDs will be 5% brightness.
    4.Step 4: Press the "ON" key again,then the LEDs will be 100% brightness,and indicating the successful code learning. If not, repeat from step 1.
    Mode-ON-Mode-ON

    Typical Applications

    Conjunction Diagram:

    Application Diagram:

    Product information for placing order

    Product name

    Item number

    LED Dimmer with RF wireless full touch wall panel

    HX-SZ100-WP-DIM

    Hot Tags: led wall dimmer switch,12v led dimmer wall switch, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd