Shenzhen Hoion Lighting Co.,Ltd
Products

dmx 512 lighting controller Dmx 512 Light Controller

HX-DMXBM-3CH DMX512 Decoder HX-DMXBM-3CH, adopt the advanced micro control unit, it can receive the DMX-512 standard digital control signal which is internationally widely used. It changes the signal into PWM control signal to actuate the LED lamp. It can also connect the DMX digital master to...

    HX-DMXBM-3CH
    DMX512 Decoder

    HX-DMXBM-3CH, adopt the advanced micro control unit, it can receive the DMX-512 standard digital control signal which is internationally widely used. It changes the signal into PWM control signal to actuate the LED lamp. It can also connect the DMX digital master to change the light color or dynamic effect. In addition, when the decoder is not connected with the DMX master, it can be used as a synchronous controller. That is to say you can synchronously control number of decoders with LED lights.

    Product Feature

    ●The DMXBM-3CH is constant voltage decoder, accept international popular DMX512 standard digital control signal, convert it to the PWM signal to drive LED lamps, applicable to a variety of constant voltage LED lamps, such as RGB LED module, lights, string lights, etc.
    ●DMX decoder can be controlled by DMX master, and the decoder can connect the signal line to continue to expand the channels up to 512, eventually be able to achieve more change in effect.
    ●Except the manual-setting address by DIP switch, it is also can be assigned address automatically, when all the decoders' DIP switch are all "0".
    ●If no master, it also can be used as synchronized controller, all of them can synchronize work as a sync-work-system when connected by RJ45.
    ●When used alone, it also can be used as a normal RGB controller, with 9 modes in total.
    ●In order to achieve synchronization of more LED lamps, RGB amplifier can be used.
    ●There channels for RGB output, each allows a maximum current of 4A.
    ●2-year warranty.

    Technical Parameters  

    Working temperature

    -20-60℃

    Supply voltage

    DC12~24V

    0utput

    3 channels

    Connecting mode

    common anode

    External dimension

    L164*W65*H40 mm

    Packing size

    L183*W82*H60 mm

    Net weight

    360g

    Gross weight

    410g

    Output gray

    RGB each 256 levels

    Output current

    <4A(each channel)

    Output power

    12V:<144W,  24V:<288W

    Interface Specifications  


    Direction for use

    This product is in compliance with DMX512 protocol, and compatible autoindex addressing and manual establishment address.
    Each universal DMX controller takes up 3 DMX addresses. It adopts 2 ways (autoindex addressing and code switch) to set up the address. When adopting the autoindex addressing, all switches are "off" status. When adopting the code switch to set up address, the 10th bit(FUN) is "off" status, and other 9 bits arebinary value code switch which are used to set up the DMX starting address code. The first bit is the lowest order bit, and the ninth is the highest order bit. That can set up 511 address codes. The DMX starting address code is equal to the sum of 1st to 9th bit. If move down one bit of code switch ("ON" set "1"), you can get the placevalue of this bit. If move up (set "0"), the placevalue is 0. For
    example: if you want to set up DMX starting address code for 73, you should move down the 7th, 4th, and 1st bit of code switch for "1", and others for "0", Then the placevalue's sum of 1st to 9th bit is 64+8+1. That is to say, the DMX512 starting address code is 73. (The correspondence dials code position is as follows)

    To choose the channel from the Dial in-line Package(DIP) Switch:

    Decimals

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    Weightnumber

    1

    2

    4

    8

    16

    32

    64

    128

    256

    FUN

    1.Example 1:

    Like figure 1, to set up the DMX starting address code for 37, should move down the 6th, 3th, 1st bit for "1", others for "0". Then the placevalue's sum of 1st to 9th bit is 32+4+1, as is for 37.

    2.Example 2:

    Like figure 2, to set up the DMX starting address code for 328, should move down the 9th, 7th, 4th bit for "1", others for "0". Then the placevalue's sum of 1st to 9th bit is 256+64+8, as is for 328.

    Other function's direction for use

    1.Test function:

    The DIP switch's 10th bit is "FUN", for built-in function key. When "FUN"="OFF", is for DMX decoder

    function. This is used to adopt DMX signal. When "FUN"="ON", the test function like figure 3:
    1-9 switch OFF: black
    Switch 1=ON: red
    Switch 2=ON: green
    Switch 3=ON: blue
    Switch 4=ON: yellow
    Switch 5=ON: purple
    Switch 6=ON: cyan
    Switch 7=ON: white 

    Switch 8=ON: Seven-color jumpy changing (8 grades of speeds are available)
    Switch 9=ON: All-color gradual changing (8 grades of speeds are available)

    2.Speed choice of jumpy changing and gradual changing's effect:

    In test function, when switch 8=ON, is for seven-color jumpy changing effect. When switch 9=ON, is for seven-color gradual changing effect. 8 grades of speeds are available for each effect:
    1-7 switch OFF: 0 grades of speeds
    Switch 1=ON: 1 grade of speeds
    Switch 2=ON: 2 grades of speeds
    Switch 3=ON: 3 grades of speeds
    Switch 4=ON: 4 grades of speeds
    Switch 5=ON: 5 grades of speeds
    Switch 6=ON: 6 grades of speeds
    Switch 7=ON: 7 grades of speeds (maximum speed)

    Like figure 4, when all switches are "ON" at the same time, the more value is taken as final. The state of decoder is gradual changing of test function. Its variable speed is 7. In addition, when signal

    indicator (green) blinks slowly, it runs the built-in program effectiveness of decoder. When the decoder receives the DMX signal, signal indicator will flash rapidly.

    Typical Applications

    Product information for placing order

    Product name

    Item number

    DMX512 Decoder

    HX-DMXBM-3CH


    Hot Tags: dmx 512 lighting controller,dmx 512 light controller, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd