Shenzhen Hoion Lighting Co.,Ltd
Products

dmx512 rgb led controller Dmx 512 RGB LED Controller

Product Description DMX512 decoder adopts the advanced micro control unit, It can receive the DMX-512 standard digital control signal which is internationally widely used. It changes the signal into PWM control signal to actuate the LED lamp. It can also connect the DMX digital console to...

    Product Description
    DMX512 decoder adopts the advanced micro control unit, It can receive the DMX-512 standard digital control signal which is internationally widely used. It changes the signal into PWM control signal to actuate the LED lamp. It can also connect the DMX digital console to change the light or each dynamic effect.
    External Dimension

    Technical Parameters

    Working temperature

    -20-60℃

    Supply voltage

    12V~24V

    0utput

    3 channels

    Connecting mode

    common anode

    External dimension

    L127*W42*H33 (mm)

    Packing size

    L135*W55*H40 (mm)

    Net weight

    195g

    Gross weight

    205g

    Output gray

    256 levels (RGB each)

    Output current

    <6A(each channel)

    Output power

    5V:<90W,12V:<216W,24V:<432W

    Frequency of RF remote control

    433.9MHz

    Frequency of PWM signal output

    5.2KHz

    Interface Specifications

    Direction for use
    This product is in compliance with DMX512 protocol, compatible autoindex addressing and manual establishment address.

    Each universal DMX controller takes up 3 DMX addresses. It adopts 2 ways (autoindex addressing and code switch) to set up the address. When adopting the autoindex addressing, all switches are "off" status. When adopting the code switch to set up address, the 10th bit(FUN) is "off" status, and other 9 bits arebinary value code switch which are used to set up the DMX starting address code. The first bit is the lowest order bit, and the ninth is the highest order bit. That can set up 511 address codes. The DMX starting address code is equal to the sum of 1st to 9th bit. If move down one bit of code switch ("ON" set "1"), you can get the placevalue of this bit. If move up (set "0"), the placevalue is 0. For example: if you want to set up DMX starting address code for 73, you should move down the 7th, 4th, and 1st bit of code switch for "1", and others for "0", Then the placevalue's sum of 1st to 9th bit is 64+8+1. That is to say, the DMX512 starting address code is 73. (The correspondence dials code position is as follows)
    To choose the channel from the Dial in-line Package (DIP) Switch:

    Number

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    Weight number

    1

    2

    4

    8

    16

    32

    64

    128

    256

    FUN

    1. Example 1:
    Like figure 1, to set up the DMX starting address code for 37, should move down the 6th, 3th, 1st bit for "1", others for "0". Then the placevalue's sum of 1st to 9th bit is 32+4+1, as is for 37.


    2. Example 2:
    Like figure 2, to set up the DMX starting address code for 328, should move down the 9th, 7th, 4th bit for "1", others for "0". Then the placevalue's sum of 1st to 9th bit is 256+64+8, as is for 328.

    The function outside of the DMX
    1. Control with DIP switch
    1) Test function:
    The DIP switch's 10th bit is "FUN", for built-in function key. When "FUN"="OFF", is for DMX decoder function. This is used to adopt DMX signal. When "FUN"="ON", the test function like figure 3:
    1-9 switch OFF: black
    Switch 1=ON: red
    Switch 2=ON: green
    Switch 3=ON: blue
    Switch 4=ON: yellow
    Switch 5=ON: purple
    Switch 6=ON: cyan
    Switch 7=ON: white

    Switch 8=ON: Seven-color jumpy changing (8 grades of speeds are available)
    Switch 9=ON: All-color gradual changing (8 grades of speeds are available)

    2)Speed choice of jumpy changing and gradual changing's effect:
    In test function, when switch 8=ON, is for seven-color jumpy changing effect. When switch 9=ON, is for seven-color gradual changing effect. 8 grades of speeds are available for each effect:
    1-7 switch OFF: 0 grades of speeds
    Switch 1=ON: 1 grade of speeds
    Switch 2=ON: 2 grades of speeds
    Switch 3=ON: 3 grades of speeds
    Switch 4=ON: 4 grades of speeds
    Switch 5=ON: 5 grades of speeds
    Switch 6=ON: 6 grades of speeds
    Switch 7=ON: 7 grades of speeds (maximum speed)

    As figure 4, when all switches are "ON" at the same time, the more value is taken as final. The state of decoder is gradual changing of test function. Its variable speed is 7. In addition, when signal indicator (green) blinks slowly, it runs the built-in program effectiveness of decoder. When the decoder receives the DMX signal, signal indicator will flash rapidly.

    ●Adopt wireless control method, 20 keys in total, function of each button as below::
    ●Standard color changes as follows:

    Brightness +

    Brightness -

    pause

    on/off

    Static red

    Static green

    Static blue

    Static white

    Static white

    Static yellow

    Static cyan

    Static purple

    Auto run

    three base color jumpy

    Three color gradually change

    speed +

    Flash

    seven base color jumpy

    Seven color gradually change

    speed-

    Typical Applications
    1.Be used as a DMX512 decoder2:


    2.Be used as a DMX512 decoder2:


    Notes
    1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V.
    2. Lead wire should be connected correctly according to grade that connecting diagram offers.
    3. This product is not to overload;
    4. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.

    Common Problems

    Problems

    Possible cause

    Solution

    1. Lamp does not light after power

    Power cord is not properly connected, or there is not output switching power supply

    Connect the power cord properly or replay the power

    Lamp power cord is not connected or short circuit

    Connected lighting power cord

    2. After connecting some of the load the controller does not work

    The connected load is too large,so that it has burned in some of the components of the controller

    Replace parts of components or replace the controller

    Hot Tags: dmx512 rgb led controller,dmx 512 rgb led controller, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd