Shenzhen Hoion Lighting Co.,Ltd
Products

DMX512 Decoder

HX-DMXBM-4CH DMX512 Decoder HX-DMXBM-4CH, adopts the advanced micro control unit, It can receive the DMX-512 standard digital control signal which is internationally widely used. It changes the signal into PWM control signal to actuate the LED lamp. It can also connect the DMX digital console...

    HX-DMXBM-4CH
    DMX512 Decoder

    HX-DMXBM-4CH, adopts the advanced micro control unit, It can receive the DMX-512 standard digital control signal which is internationally widely used. It changes the signal into PWM control signal to actuate the LED lamp. It can also connect the DMX digital console to change the light or each dynamic effect. In addition, when the decoder is not connected with the DMX console, it can be used as a synchronous controller. That is to say you can Synchronously control number of decoders and LED lights.

    Product Feature

    ●The DMXBM-4CH is constant voltage decoder, accept international popular DMX512 standard digital control signal, convert it to the PWM signal to drive LED lamps, applicable to a variety of constant voltage LED lamps, such as RGB LED module, lights, string lights, etc.
    ●DMX decoder can be controlled by DMX master, and the decoder can connect the signal line to continue to expand the channels up to 512, eventually be able to achieve more change in effect.
    ●Except the manual-setting address by DIP switch, it is also can be assigned address automatically, when all the decoders' DIP switch are all "0".
    ●If no master, DMXBM decoder also can be used as synchronized controller, all of them can synchronize work as a sync-work-system when connected by RJ45.
    ●When used alone, DMXBM also can be used as a normal RGBW controller, with 9 modes in total.
    ●In order to achieve synchronization of more LED lamps, signal repeater can be used.
    ●There channels for RGB output, each allows a maximum current of 4A.
    ●2-year warranty.

    Technical Parameters

    Working temperature

    -20-60℃

    Supply voltage

    DC12~24V

    0utput

    4 channels

    Connecting mode

    common anode

    External dimension

    L164*W65*H40 mm

    Packing size

    L183*W82*H60 mm

    Net weight

    360g

    Gross weight

    410g

    Output gray

    RGB each 256 levels

    Output current

    <4A(each channel)

    Output power

    12V:<192W,24V:<384W

    Interface Specifications

    Direction for use

    This product is in compliance with DMX512 protocol, and compatible autoindex addressing and manual establishment address.
    1. Each universal DMX controller takes up 4 DMX addresses. It adopts 2 ways code switch to set up the address. When adopting the autoindex addressing, all switches are "off" status. When adopting the code switch to set up address, the 10th bit(FUN) is "off" status, and other 9 bits arebinary value code switch which are used to set up the DMX starting address code. The first bit is the lowest order bit, and the ninth is the highest order bit. That can set up 511 address codes. The DMX starting address code is equal to the sum of 1st to 9th bit. If move down one bit of code switch ("ON" set "1"), you can get the placevalue of this bit. If move up (set "0"), the placevalue is 0. For example: if you want to set up DMX starting address code for 73, you should move down the 7th, 4th, and 1st bit of code switch for "1", and others for "0", Then the placevalue's sum of 1st to 9th bit is 64+8+1. That is to say, the DMX512 starting address code is 73. (The correspondence dials code position is as follows)
    To choose the channel from the Dial in-line Package(DIP) Switch:

    1.Example 1:

    Like figure 1, to set up the DMX starting address code for 37, should move down the 6th, 3th, 1st bit for "1", others for "0". Then the placevalue's sum of 1st to 9th bit is 32+4+1, as is for 37.

    2.Example 2:

    Like figure 2, to set up the DMX starting address code for 328, should move down the 9th, 7th, 4th bit for "1", others for "0". Then the placevalue's sum of 1st to 9th bit is 256+64+8, as is for 328.


    Other function's direction for use

    1.Test function:
    Signal detection way: When FUN(10)=OFF, and receiving the main control console DMX512 signal, the green signal light on the outer covering would twinkle fast. At the moment, the state of luminaire is controlled by the console. When FUN(10)=ON, the green signal light's speed would slow down. This time, the state of luminaire is controlled by the addressable switch. When "FUN"="ON", the test function like figure 3:
    1-9 switch OFF: black
    Switch 1=ON: red
    Switch 2=ON: green
    Switch 3=ON: blue
    Switch 4=ON: yellow
    Switch 5=ON: All right
    Switch 6=ON: Flash
    Switch 7=ON: jumpy changing

    Switch 8=ON: All-color gradual changing
    Switch 9=ON: Flowing

    2.Speed choice of jumpy changing and gradual changing's effect:
    When Fun(10)=ON, and 6th or 9th bit being for "ON", switch 1 to 5 are for available grade of speed. There are 6 grades altogether.1-7 switch OFF: 0 grades of speeds
    Switch 1=ON: 1 grade of speeds
    Switch 2=ON: 2 grades of speeds
    Switch 3=ON: 3 grades of speeds
    Switch 4=ON: 4 grades of speeds
    Switch 5=ON: 5 grades of speeds

    Like figure 4, when all switches are "ON" at the same time, the more value is taken as final. The state of decoder is Flowing of test function. Its variable speed is 5. In addition, when signal indicator (green) blinks slowly, it runs the built-in program effectiveness of decoder. When the decoder receives the DMX signal, signal indicator will flash rapidly.

    Typical Applications

    Product information for placing order

    Product name

    Item number

    DMX512 Decoder

    HX-DMXBM-4CH

    Hot Tags: dmx512 decoder, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd