Shenzhen Hoion Lighting Co.,Ltd
Products
LED RGB Controller With RF Wireless Full Touch Wall Panel

LED RGB Controller With RF Wireless Full Touch Wall Panel

HX-SZ600-WP86-RGB, adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED RGB lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power input...

    HX-SZ600-WP86-RGB, adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED RGB lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power input and output with four interfaces, including + V is extremely common interfaces, the other three for the RGB control interface. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through full-touch wall panel remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.

    Product Features

     ● Designed for RGB constant voltage LED lights, Working voltage DC12-24V.

     ● Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.

     ● Adopts full-touch wall panel remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters. The working voltage of wall-panel is AC90-265V.

     ● Structure/dimension/installation of the wall panel according to the 86-type European standards.

     ● Memory function, each time power-on reserve the mode which stop in the last power-down.

     ● The brightness of static color is adjustable, 256 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.

     ● Long-press the brightness and speed key can get the fast adjustment, convenient for operation.

     ● Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.

     ● Warranty of this product is one year, exclude the artificial situation of damaged or overload working.

     

    Technical Parameters 

    Controller

    Working temperature-20-60℃Supply voltageDC12V-24V
    Static power consumption<1WConnecting modeCommon anode
    Grayscale256 levelsSpeed stage100 grade
    External dimensionL91*W88*H24 mmPacking sizeL102*W102*H66 mm
    Net weight280gGross weight300g
    Output3 channelsMax. Output current8A*3CH
    Mode18RF distance≤20m
    PWM frequency433.92MhzMemory functionsupport
    Output power12V:<288W, 24V:<576W

    Remote control

    Ambient temperature0-45℃Working voltageAC90-265V(50/60Hz)
    Standby power0.2WWorking power2W
    Net weight130gRF frequency433.92MHz
    Dimension86*86*34mmRF distance≤20m
    Structure86-type European standard

    Interface Specifications

    RGB Connection:V+→COM、CH1→R、CH2→G、CH3→B;

    Direction for use

     ● Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;

     ● Adopts RF full touch wall-panel remote control, with one color ring and 5 function buttons.

     ● The signal light flash-- represents the signal has been sent well;

    The function of buttons are shown as below:

    The function of each button as below:

    Name of keyInstructionRemarks
    ON/OFFON or OFF in any time
    ModeThe mode will move to next, when touch the key each time9 modes in total.
    Speed/Brightness +The Speed/Brightness will +1, when  touch the key each timeSpeed for dynamic modes, Brightness for static modes.
    Speed/Brightness -The Speed/Brightness will -1, when touch the key each timeSpeed for dynamic modes, Brightness for static modes.
    Color RingTouch any color which is wanted

    10 modes in total as below:

    NO.PatternsRemarks
    1Static whiteBrightness is adjustable
    2White flashSpeed is adjustable, brightness is unadjustable
    3White breath
    4Three-color jump changing
    5Seven-color jump changing
    6Three-color gradient changing
    7Seven-color gradient changing
    8R/G cross fade
    9R/B cross fade
    10G/B cross fade

     

    Tips: Receiver can be controlled by any one the same remote as factory default; the wall-panel remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

     

    Matching code operation

    If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:

    1. Step 1: Pressing key “mode” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.

    2. Step 2: Continuously to press the key “ON“ for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.

    3. Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.

    4. If not, please re-operate from step 1 to 2.

     

    Clear code operation

    Back to factory default, receiver can be controlled by any one the same remote control.

    1. Step 1: Pressing key “Mode” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.

    2. Step 2: Continuously to press “Speed/Brightness -“ 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.

    3. Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be controlled by any remote control(any one the same remote control can be used to clear the code).

    4. If not, please re-operate from step 1 to 2.

     

    Wall-panel Installation instruction

    Step 1: Fixing the bottom cover into the wall; Step 2:Fixing the metal frame into the bottom cover with screws( projecting part upward )


    Step 3: Pressing the wall-panel into the metal frame, after connecting well the input and output wires.

    Typical Applications 

    Application Circuit 1:

    Application Circuit 2:( Synchronization function with network Line ))

    Product information for placing order

    Product nameItem number
    LED RGB controller with RF wireless full touch wall panelHX-SZ600-WP86-RGB


    Hot Tags: led rgb controller with rf wireless full touch wall panel, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd