Shenzhen Hoion Lighting Co.,Ltd
Products

Led Strip Ir Controller

HX-IRBT002-DIM IR BT remote sync controller-DIM HX-IRBT002-DIM, adopts the advanced micro control unit, it is used for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip and so on; Belong to low-voltage DC power input and output with four...

    HX-IRBT002-DIM
    IR BT remote sync controller-DIM

    HX-IRBT002-DIM, adopts the advanced micro control unit, it is used for controlling constant voltage LED lamps. For instance, point source of light, flexible light strip and so on; Belong to low-voltage DC power input and output with four interfaces, including V+ is the common positive interfaces, the other three for the negative interface. Meanwhile, you can turn on/off, adjust brightness for different lighting effects through infrared 14keys remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.

    Product Features
    ●Designed for single color constant voltage LED lights, Working voltage DC12-24V.
    ●Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.
    ●Adopts IR 14keys remote control with fashion appearance, distance up to 10 meters in the open air.
    ●Memory function, each time power-on reserve the mode which stop in the last power-down;
    ●3 modes in total, including static colors and 2 dynamic changes.
    ●The brightness of static color is adjustable, 256 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.
    ●Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
    ●Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
    ●Warranty of this product is one year, exclude the artificial situation of damaged or overload working.

    Technical Parameters

    Controller:

    Working    temperature

    -20-60℃

    Supply    voltage

    DC12V-24V

    Static    power consumption

    <1W

    Connecting    mode

    common    anode

    Grayscale

    256    levels

    Speed    stage

    100    grade

    External    dimension

    L91*W88*H24    mm

    Packing    size

    L150*W90*H60mm

    Net    weight

    280g

    Gross    weight

    300g

    Output

    3    channels

    Output    current

    ≤8A(each    channel)

    Mode

    3

    Remote    distance

    Up    to 10M

    Output    power

    12V:<288W,    24V:<576W

    Memory    function

    Support

    Remote  control:


         Working    temperature

    -15℃~60℃

    Supply voltage

    DC3V(CR2032battery)

    Static    current

    <3uA

    Working    current

    <20mA

    Net    weight

    50g

    Carrier frequency

    38.0KHZ±0.76KHZ

    External    dimension

    L138*W40*H10    mm

    Remote distance

    10M

    Interface  Specifications

    Connection:V+→COM、CH1→V-、CH2→V-、CH3→V-;

    Direction for use
    Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;
    Operation: to ensure that there is no barrier between the remote controller and the receiver.
    The signal light flash-- represents the signal has been received well;
    The function of buttons are shown as below:

    Name

    Description

    ON

    Turn on

    OFF

    Turn off

    Brightness +

    The brightness will    add 1 level after each time press. Long-press can get fast adjusting.

    Brightness -

    The brightness will reduce    1 level after each time press. Long-press can get fast adjusting.

    Hot brightness key +

    4 levels brightness    (10%、30%、70%、100% ) hot selection key, lights will go to    next one after each pressing.

    Hot brightness key -

    4 levels brightness    (10%、30%、70%、100% ) hot selection key, lights will go to    last one after each pressing.

    Mode key

    3 modes in total:    100% static, flash, breathe

    Night light

    Press the button go to    night light mode(night    light Setting:Under night light mode, press &ldquo;Set    button&rdquo; and hold on for 10 seconds will go into the night light setting,    press the left button to down the brightness, press the right button to up    the brightness. Adjustable range: 1%-10%.) 

    Speed +

    Add the speed of    dynamic mode. Long-press can get fast adjusting.

    Speed -

    Reduce the speed of    dynamic mode. Long-press can get fast adjusting.

    Delay button

    The light will be    delay off in 30 seconds.

    Typical Applications
    Application  Circuit 1:


    Application  Circuit 2:(Synchronization function with network Line )

    Product information for placing order


         Product name

    Item number

    IR BT remote sync    controller-DIM

    HX-IRBT002-DIM

     

     


    Hot Tags: led strip ir controller, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd