Shenzhen Hoion Lighting Co.,Ltd
Products
LED Sync CCT Controller With USA Wall-panel Remote Control

LED Sync CCT Controller With USA Wall-panel Remote Control

HX-SZ600-WP120-CCT, adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED CW+WW lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power...

    HX-SZ600-WP120-CCT, adopts the most advanced PWM (Pulse Width Modulation) digital control technology, it is used for controlling constant voltage LED CW+WW lamps. For instance, point source of light, flexible light strip, led modules, led strings and so on; It belongs to low-voltage DC power input and output with four interfaces, including two identical V+ for positive interfaces, the other two for the CW and WW control interface. Meanwhile, you could adjust brightness, color temperatures and various dynamic changes in lighting effects through full-touch wall panel remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.

    Product Features

     ● Designed for CW+WW constant voltage LED lights, Working voltage DC12-24V.

     ● Two channels output, Max. load current: 2CH*8A; Max. load power: 192W/12V; 384W/24V.

     ● Adopts full-touch wall panel remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters. The working voltage of wall-panel is AC90-265V.

     ● Structure/dimension/installation of the wall panel according to the 120-type US standards.

     ● Memory function, each time power-on reserve the mode which stop in the last power-down.

     ● Long-press the brightness and speed key can get the fast adjustment, convenient for operation.

     ● Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.

     ● Warranty of this product is one year, exclude the artificial situation of damaged or overload working.


    Technical Parameters

    Controller


    Working temperature-20-60℃Supply voltageDC12V-24V
    Static power consumption<1WConnecting modecommon anode
    Gray scale256 levelsSpeed stage100 grade
    External dimensionL91*W88*H24 mmPacking sizeL102*W102*H66 mm
    Net weight300gGross weight380g
    Output2 channelsOutput current≤8A(each channel)
    Mode9Remote distanceUp to 20M
    PWM frequency433.92MhzMemory functionsupport
    Max. Output power12V192W, 24V384W

    Remote control


    Ambient temperature0-45℃Working voltageAC90-265V(50/60Hz)
    Standby power0.2WWorking power2W
    Net weight140gRF frequency433.92MHz
    DimensionL120*W74*H38mmRF distance≤20m
    Structure120-type US standard

    Interface Specifications 


    ConnectionV+→COMCH1→CWCH2→WWCH3NC (no connect)


    Direction for use

     ● Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;

     ● Adopts RF full touch wall-panel remote control, with one dimming ring and 5 function buttons. 

    The function of buttons are shown as below:


    NOModeMarks
    1Static CW+WW
    Brightness is adjustable
    2CW+WW flashSpeed is adjustable
    3CW+WW fade
    4CW and WW flash alternately
    5CW and WW fade alternately
    6Static WW, CW fade
    7Static WW, CW flash
    8Static CW, WW fade
    9Static CW, WW flash

    Tips:; the wall-panel remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

    Matching code operation

    If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:

    1. Step 1: Pressing key “mode” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.

    2. Step 2: Continuously to press the key “ON“ for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.

    3. Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.

    4. If not, please re-operate from step 1 to 2.

     

    Wall-panel Installation instruction

    Step 1: Fixing the bottom cover into the wall;Step 2:Fixing the metal frame into the bottom cover with screws( projecting part upward )

    Step 3: Pressing the wall-panel into the metal frame, after connecting well the input and output wires.

    Typical Applications 

    Application Circuit 1:

    Application Circuit 2:( Synchronization function with network Line ))

    Product information for placing order


    Product nameItem number
    LED Sync Controller with Wall-panel remote control-CCTHX-SZ600-WP120-CCT


    Hot Tags: led sync cct controller with usa wall-panel remote control, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd