Shenzhen Hoion Lighting Co.,Ltd
Products

wifi light switch controllers Light Controller Wifi

HMW-WIFI-V02 WIFI-LED Controller HMW-WIFI-V02 is the second generation of HX-WIFI-V01, The function of home lighting control system is more powerful and the interface is more humanized. With the multi-zones control, which can achieve to control each zone lighting effects independently. It can...

    HMW-WIFI-V02
    WIFI-LED Controller

    HMW-WIFI-V02 is the second generation of HX-WIFI-V01, The function of home lighting control system is more powerful and the interface is more humanized. With the multi-zones control, which can achieve to control each zone lighting effects independently. It can be up to 10 separate zones at most. Combined with the application of WIFI technology, makes the controlling is more advanced, intelligent and convenient. you can customize the area photos as your ideas, also can be connected with the family of router through a smart phones with android or apple system or a tablet, install the corresponding control software to control the change of the LED lights. HMW-WIFI-V02 can be used as dimmer, CT ,and RGB controller, only need to select the right control interface in the software. it is used for controlling a variety of lights, such as, RGB LED strip lights, LED modules, LED down light, LED Panel Lights and so on. If you don't have any mobile devices with the controlling software at hand, you also could use a 2.4G RF Multi-zones remote control to control it. This model designed for both constant voltage and constant current led lights. It is truly intelligent.

    Product Feature

    ●WIFI master controller,Working voltage:DC5V
    ●Support multi-zones control independently, self-defined the pictures and names as your ideas for each zones;
    ●With WIFI control function, you can choose Android/ apple mobile devices or wireless RF remote controller; more flexible, efficient and intelligent.
    ●With the 3-in-1(RGB ,CT, Dimming) apple/android software. One device suit to different lighting application scene, very flexible.
    ●2 year warranty.

    Technical parameters

    1.Controller:

    Working temperature

    -20-60℃

    Working voltage

    DC5V

    Static current

    <1W

    output

    2.4GHz

    WIFI brightness level

    1-100%

    WIFI speed level

    100 grade

    Remote control brightness level

    1-100%

    Remote control speed level

    100 grade

    N.W.


    G.W.


    Case dimension

    108mm*63mm*28mm

    Box dimension

    109mm*109mm*53mm

    WIFI frequency

    2.4G

    Receiver remote frequency

    2.4G

    Receiving sensitivity

    802.11b:DSSS(-5dBm)802.11b:CCK(-10dBm)802.11g:OFDM(-15dBm)

    2.RF Remote control:

    Working temperature

    -20-60℃

    Power supply

    12V23A*2

    Standby current

    16uA

    Working voltage

    12V

    Working current

    19mA

    Remote control distance

    <=30m

    RF frequency

    2.4G

    Power consumption

    0.192mW

    3.Software:

    Name

    FreeLighting V1.0

    Platform

    Android/IOSwith the wifi function

    Size

    Android(developing) IOS(3.4M)

    Language

    English

    Category

    Communication



    Using illustration

    1、FreeColor V1.0 software installation and SSID (system settings ID) reset.
    The software is divided into Android and IOS versions, to choose the installationsuitable version according to your mobile phone system.

    The method of installation and use the Android and the IOS version as follow:
    Android:open the CD, click& Install FreeLighting V1.0 software ,and complete it
    ISO:It's the same as the other software, download the "FreeLighting" from App store and install it.

    2、FreeColor V1.0 software instruction
    HMW-WIFI-V02 controller has two functions , Both Stand-alone Mode Connect to HX-001 and Connect to family router Network. Here are the use method of the two functions :

    (1). Using Stand-alone Mode Connect to HX-001
    ① To find the WIFI network named "HX---" (such as HX001 or HX002) in the mobile phone, and connect to the network without passwords;
    ② Then open the FreeLighting V1.0 control software into the control interface.If open the FreeLighting V1.0 control software not connected wi-fi network or need to replace other SSID, returned to the mobile phone Settings interface, enter the WIFI connection option to select the connection;

    (2) .To join the family router functions
    After finish step 1 (this step is very important);click on the home screen icon ,and then enter the scan interface. As following:

    Click "SCAN" start scanning the nearby WIFI control box,as following:

    Click go in, appeared the following interface:

    Please open the Family Router Mode

    And then into Family Router Selection interface:

    Scanning the nearby family routing the results are shown as:

    Choose your own family routing SSID to enter passwords, as following:


    Complete the enter, click "Done". the interface will Pop up in the name of the routing you join. As following:

    Click OK, the controller is automatically restart;it needs to wait for 15-20 seconds, if the connection is successful, the WIFI indicator light up;it means that the connection is successful.Re scanning once into the software again, need to assign IP addresses to the WIFI controller, wait to show up again.

    clickto join the router success, if not , please hold down the RESET button on the WIFI controller for 5 seconds, according to the step 1 reconnection again, until success.

    3. Once network setting up, enter the Control interface of the software, have three Type Settings (RGB/CT/DIM) interface.as following:

    4)、After code successfully, you can realize all kinds of effects, the details as bellow, Let us see the RGB interface(other interface is almost the same).

    NO.

    Button name

    Function

    1

    Off

    to turn off the corresponding area of the lamps and lanterns in any time

    2

    On

    to turn on the corresponding area of the lamps and lanterns in any time

    3

    Auxiliary function button

    Mainly used for the code and save function

    4

    RGB color bar

    Touch the corresponding color ,the amps and lanterns show the same.


    5

    Saturation bar

    Corresponding lamps to proceed the white balance


    6

    Brihgtness bar

    To control the brightness of lamps

    7

    static interface window

    Static interface select function button

    8

    dynamic interface window

    choose to jump, gradient effect of different

    9

    Scene saving interface window

    Transfer scene interface fast

    10

    Delay shutdown interface

    Delay off the lamps

    11

    Return button

    Back to the main interface

    5)dynamic mode control interface

    (1)、MODE: select the different dynamic mode, such as flash, fade and etc
    (2)、SPEED:select the speed level of the dynamic mode,100 levels in total;
    (3)、EFFECT: select the different effect based on the different mode.

    6)DIY modes manage interface:

    7) Delay off setting interface:

    8) Return to the main interface button:

    The controller working state indicating lamp.

    Indicating light

    Function

    Power

    Power Indicating lamp stays brightness shown the power supply normally.

    Wifi

    It always stays brightness When a device (such as mobile phone or tablet) connects to the controller

    2.4G

    It flickers when receives the correct WIFI data or the remote control, but in spare time it will go out

    RESET button:hold on the button 5 seconds, all the have been setted WIFI data will be erased, return to the factory defalt.

    4、Remote controller specification:
    RGB remote controller function illustration:

    Adopts RF remote control technology, with 18 buttons, one color ring and one color sense lamp. The function of each button as below:

    Name of key

    Instruction

    Remarks

    ON/OFF

    ON or OFF in any time


    Pause

    Pause or Continue in dynamic mode


    Mode up

    Select sample color function button, press once will add a color on.


    Mode down

    Select sample color function button, press once will reduce a color.


    brightness up

    brightness up under the static mode

    With continuous function

    brightness down

    brightness down under the static mode

    With continuous function

    speed up

    Speed up in the dynamic mode

    With continuous function

    speed down

    Speed down in the dynamic mode

    With continuous function

    Zone selection

    0-9 for up to 10 zones.each number corresponding an IP address location. Every time press one of the numbers will control the corresponding zone. Up to 10 areas.


    Color Ring

    In the boot state,it shows the colors when different colors have been touched.


    Color sense lamp

    when the color ring has been touched,then the sensor light is the same color. press other keys will be lights up white color.


    Typical applications

    DIM remote controller function illustration

    (1)Adopts 2.4G RF remote control technology, with one LCD screen and 18 buttons. The function of each button as below:

    Name of key

    Instruction

    Remarks

    ON/OFF

    ON or OFF in any time


    IP

    Used for IP setting


    Fun

    Select sample color function button, press once will change.


    B/S +

    Brightness up under the static mode/Speed up under the dynamic mode

    With continuous function

    B/S -

    Brightness down under the static mode/Speed down under the dynamic mode

    With continuous function

    ALL

    All zones will be in control at the same time


    Hot key

    50%/100% level static lighting.


    Zone selection

    to control any of the zones


    LCD screen

    how the current state, zone, ON/OFF, brightness/speed levels


    (2)Setting SSID(If more than one WIFI Controller in close area, we can reset the SSID for the devices in order to avoid they jamming each other. The SSID are 16 in max.)
    The acquiescent SSID number for all devices is HX001, a Mobile with WIFI function will be needed when resetting the SSID to achieve each independent control .The SSID rang is: HX000-HX016. The steps are as follow:

    ① Making the WIFI Controller properly connected to LED Lights, and then open the power;
    ② Opening the browser on your mobile, type in "192.168.2.2", the interface will pop into as below

    The initial acquiescent Username: "admin", password: "admin". And click "OK" to enter the interface.

    (3)Resetting the login user name and password in the page as below:

    After setting, click "Apply" to finish.

    (4)Resetting the SSID in the page as below.

    After setting, click "Apply" to submit.

    1. If necessary, setting the linking password for more security.
    A. Select the "Security Mode": WPA2-PSK.

    B. After setting, click "Apply" to submit.

    Application scenarios:



    Product information for placing order

    Product name

    Item number

    WIFI-LED Controller

    HMW-WIFI-V02


    Hot Tags: wifi light switch controllers,light controller wifi, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd