Shenzhen Hoion Lighting Co.,Ltd
Products
LWP120 Series Led Wall Panel CW+WW Controller

LWP120 Series Led Wall Panel CW+WW Controller

It adopts the most advanced PWM (Pulse Width Modulation) digital control technology, It is constant voltage led full-touch wall panel CCT controller, specially designed for CW+WW Led lighting. For instance, Led module, flexible Led strip, etc. To select the desired light levels or...

    It adopts the most advanced PWM (Pulse Width Modulation) digital control technology, It is constant voltage led full-touch wall panel CCT controller, specially designed for CW+WW Led lighting. For instance, Led module, flexible Led strip, etc. To select the desired light levels or color-temperature by the wall panel controller. It has many advantages such as beautiful appearance , easily to install, and simply to use. The dimension and structure of the wall panel are in line with the 120-type US standard.

    Features:

     ● Designed for CW+WW constant voltage LED lights, Working voltage DC12-24V.

     ● Two channels output, Max. load current: 2CH*4A; Max. load power: 96W/12V; 192W/24V.

     ● The wall panel adopts the capacitive touch-sensitive design, unique appearance and easy-operation.

     ● Memory function, each time power-on reserve the mode which stop in the last power-down.

     ● Amplifier is available to achieve more LEDs sync-control.

     ● Structure/dimension/installation of the wall panel according to the 120-type US standards.

    Technical Parameters:

    Working temperature-20-60℃Working voltageDC 12~24V 
    Static power consumption<1WConnecting modeCommon anode
    Gray scale256 levels PWM frequency700Hz
    N.W140gG.W160g
    External dimensionL120*W74*H38mmPacking dimensionL150*W90*H60mm
    Output2 channelsMax. Output current4A*2CH
    Max. Output power12V:96W,  24V:192W

    Dimension:


    Interface Specification

    Wall-panel Installation instruction

    Step 1: Fixing the bottom cover into the wall;

    Step 2:Fixing the metal frame into the bottom cover with screws( projecting part upward )

    Step 3: Pressing the wall-panel into the metal frame, after connecting well the input and output wires.

    Direction of use

    Connecting the load wire at first, followed by the power wire; 

    Please ensure short circuit can not occur between wires before you turn on the power;

    1.Function of the touch panel


    NameDescriptionNote
    ON/OFFTurn on/off the light.This button is designed with backlight, convenient for users locate it in dark environment
    Brightness +Brightness add key, each touch add 1 level, 256 levels in total.Long- press for fast adjusting
    Brightness -Brightness reduce key, each touch reduce1 level .Long-press for fast adjusting
    CW balance keybalance to cool whiteLong-press for fast adjusting. The sum of two channels output power remains constant when CCT balanced.
    WW balance keybalance to warm white
    Delay offDelay off the lights in 30 seconds
    Night lightNight light hot key Brightness of night light is 5%

    2.Adopt RF2.4G remoter to control the led controller, the function of each button as the table below:


    NameDescription
    Set buttonFor setting the night light and matching code with receiver. Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting. Press the set button again to save the setting and quit out.
    ONTurn on 
    OFFTurn off
    Brightness +The brightness will add 1 level after each time press. Long-press can get fast adjusting.
    Brightness -The brightness will reduce 1 level after each time press. Long-press can get fast adjusting.
    CW balance key Balance to cool white. Long-press can get fast adjusting.
    WW balance keyBalance to warm white. Long-press can get fast adjusting.
    ModeHot key for 3 CCT full-light: 100% CW, 100% WW, 100%CW+100%WW, and 4 dynamic modes.
    Night lightPress the button go to night light mode(night light Setting:Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting, press the left button to down the brightness, press the right button to up the brightness. Adjustable range: 1%-10%.)  
    Speed +Add the speed of dynamic mode. Long-press can get fast adjusting.
    Speed -Reduce the speed of dynamic mode. Long-press can get fast adjusting.
    Delay buttonThe light will be delay off in 30 seconds.


    Typical Applications     

    Application circuit:

    Product information for placing order

    Product nameItem number
    Wall panel CCT controllerHX-LWP120-RFBT-CCT


    Hot Tags: lwp120 series led wall panel cw+ww controller, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd