20-key RF controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through wireless remote control. And according to the actual need of customers, it can carry out jumpy changing, gradual changing, stroboflash and other effects of change.
DC5V, 12V~24V optional (specify the required voltage on orders)
common anode/cathode optional (specify the required voltage on orders)
Static power consumption
5V:＜45W, 12V:＜108W, 24V:＜216W
Power input interface (port1):
Adopt conventional power transposon as a DC power input interface.
Load output interface:
Adopt oblate interface.
Direction for use
●Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power；
●Adopt wireless control method, 20 keys in total, function of each button as below:：
●Each press, the green light flash one time, indicating that has entered the next state.
●Standard color changes as follows:
three base color jumpy
Three color gradually change
seven base color jumpy
Seven color gradually change
1. Supply voltage of this product is DC12V~24V, never connect to others or AC220V.
2. Lead wire should be connected correctly according to grade that connecting diagram offers.
3. If the load is more, by way of port 2 to connect the power will be better.
4. This product is not to overload;
5. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.
|1.Lamp does not light after power|
Power cord is not properly connected, or there is not output switching power supply
Connect the power cord properly or replay the power
Lamp power cord is not connected or short circuit
Connected lighting power cord
2. After connecting some of the load the controller does not work
The connected load is too large，so that it has burned in some of the components of the controller
Replace parts of components or replace the controller
Address: 6-7F, Huichuan Science and Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
Contact: Jane Zheng