Shenzhen Hoion Lighting Co.,Ltd
News
You are here: Home > News > Content
Dimmable And Non-Dimmable LED Lamps
Edit: Shenzhen Hoion Lighting Co.,Ltd    Date: Dec 08, 2015

Many retrofit LED lamps are sold in two versions; dimmable and non-dimmable. You will need to choose the correct type for your lighting circuit.

For several years manufacturers have been introducing LED lamps onto the market with the eventual goal of replacing incandescent and CFL lamps. The design of these lamps has evolved from very simple non-dimmable solutions, to sophisticated but expensive dimmable solutions, then finally to more cost effective dimmable solutions.

Dimming LED lamps can save energy and changes the visual appearance and mood of your space. You can use a dimmable LED lamp in a non-dimmable circuit. You should NOT use a non-dimmable lamp in a dimmable circuit as it may cause damage to the lamp and or circuit. Integral lamps are clearly marked as dimmable or non-dimmable on the packaging and on the lamp.

Most dimmers installed today are designed to be used with high-power circuits to drive traditional filament lamps which were all quite uniform and dimmable by just a voltage change. LED lamps on the other hand are low-power and more complex. An LED bulb is a solid-state product that has built in circuitry (called a driver) that takes high-voltage AC input current and converts it to low-voltage DC current to drive the LEDs. Furthermore driver specifications are not uniform across the LED industry.

They are many different types of dimmers installed in homes and offices of various specifications (e.g. resistive; leading-edge and trailing-edge and electronic). So when using new LED lamps with existing dimmers there is a matching of old technology with new which can be challenging.

Matching old and new

The driver in dimmable LED lamps may work with many types of dimmer but not all, for instance LED lamps tend to work better with trailing-edge dimmers rather than leading-edge dimmers, but an existing dimmer may have a minimum load that is too high for an LED lamp, e.g. A 60W filament lamp may use a dimmer that has a minimum load of 25W the replacement LED has a power rating of 6.5W - below the level required by the dimmer. Dedicated LED dimmers have a very low minimum power rating. 

The dimming experience can be different with LED. Overall the LED dimming performance is regulated by the capability of the LED driver/chip and the compatibility of the dimming circuit. Since there are a huge number of possible combinations of lamps and dimmer, it is not be possible to have an LED lamp that works in all dimming environments.

LED currently have a lower dimming range than a filament lamp – LEDs currently dim down to about 10% of the total light output whereas filaments may go down to 1-2%.  Low-voltage transformers as used with MR16 12V spotlights also add to the complexity

 

What will happen when a dimmer is incompatible with an LED lamp?

Many LED lamps are advertised as dimmable, however in reality the performance of many of them is unimpressive with varying results depending on the dimmer used and loading of the circuit. In some cases the LED lamp has been taken out of its box and installed in a room with a dimmer switch only to discover flickering and uneven adjustment of the light level.

·         Flickering - Lamps will flicker (can also occur if a non-dimmable lamp is used)

·         Drop-out - No light output at the end of the scale

·         Dead travel - When the dimmer is adjusted there is no matching change in light output (light may not dim to acceptable level)

·         Not smooth - Light output may not go from dim to bright linearly

·         Multiple lamps - issues may become apparent when multiple lamps are added

·         Damage or failure - LED driver, circuit or LED is damaged or fails.

·         Load below minimum - The power load of the LED lamp is below the minimum required by the dimmer

·         Mixed models- Different models of LED will likely have different drivers - since drivers behave differently this could result in dimming issues.

What can I do about dimming LED bulbs?

·         Ideally upgrade your dimming circuit with good quality dimmers designed for LED - easy to do for new LED installations. This is a good investment for the lifespan of your LED lamp.

·         Make sure you purchase the correct dimmable or non-dimmable LED for your type of circuit

·         Use a compatible dimmer

·         Change you circuit from dimming to non-dimming if not used much

·         Remove transformers used with 12V MR16 lamps and convert to 240V GU10 lamps in the same fitting by changing the lamp holder (should be completed by an electrician)

·         You should consider buying the same model and brand of LED lamp for all the fittings in an area of a room (all lamps will have the same driver)

·         It would also be a good idea to buy spares - LED technology (as with other technologies such as mobile phones) is always improving and changing.

The most important is:  please consult a qualified electrician to make any changes to your circuit.

Product Categories

Fast Track

  • Feedback
    Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
    Tel: 86-755-27966554    
    Fax: 86-755-29707831    
    E-mail: hoionlighting@led-ctrl.com
Copyright © Shenzhen Hoion Lighting Co.,Ltd