Shenzhen Hoion Lighting Co.,Ltd
News
Home > News > Content
4-zone Remote Control For Dual-white Led Luminaries Release
Shenzhen Hoion Lighting Co.,Ltd | Updated: Jun 07, 2017

RFBK-CCT 545545.jpg

ITEM CODE: HX-RFBK-CCT-2.4G 

Product Feature

1)Product supply voltage is 3V(AAA*2)

2)Adopt 2.4G wireless control, with feature of long distance and non-directional control

3)Full keys design, unique interface, simple operation

4)Multi zone control function simple: could control single zone or overall zones; controlled area indicated by indicator light , more intuitive

5)Hanging storage way, more easy to access and storage 

6)Two ways for accessories installation, flexible choice

7)Two Colors: Black/White

8)RFBK-DIM-2.4G match with HC series dimming driver for both CC and CV LED luminaries

9)Three years warranty

Technical Parameters

Working temperature-20-60℃Working voltage3V (AAA*2PCS)
Sleep current<25uAEmission current<30mA
Sleep power consumption<75uWEmission power consumption<90mW
Net weight55gDimensionL148*W40*38 (mm)
RF distance≤30mRF frequency2.4GHz
AccessoriesRemote control rack, 3M foam sponge glue, M4 double-headed self-tapping screws, φ6 expansion tube, battery, manual

Direction for use

Nameof key Description
ONON in any time
OFFOFF in any time
Mode3 static modes:warm white, cool white, pure white
Brightness +The brightness will add 1 level after each time press. Long-press can get fast adjusting.
Brightness -The brightness will reduce 1 level after each time press. Long-press can get fast adjusting.
CW balance keyBalance to cool white. Long-press can get fast adjusting.
WW balance keyBalance to warm white. Long-press can get fast adjusting.
Zone selection keySelection for the control zone (The corresponding zone indicator will light up when selected, support single zone control and overall control)

图片2.png

Remark:Short press the zone selection key is for switch between the single zones; Long press the zone selection key for more than 3s is for all zones selection, 4 indicator lights will light up at the same time, and overall control for lamps from all zones.

Zone-setting 

Multi-zone remote control need to set the zone before using, that means match each driver to the corresponding group.

Matching Zone  operation

Step 1: Connect the driver with load LED(Without power on) 

Step 2: Select the zone( press the zone selection key makes the indicator lamp for the corresponding zone light up)

Step 3: Pressing the key “Mode” and power on the driver, the load LEDs will be 50% brightness white as responding. Means entered the learning code/ clear code status successfully.(Notice: Step 3 need to within 8s after step 2, zone indicator lamp will be off  after without any operation for 8s )

Step 4:Continuously to press the key “On” for 3 times within 5 seconds after step 3, the brightness of LEDs will change from 25%-10%-back to preset level. Code learning successfully.

If not, please re-operate from step 1 to 4.(Notice: Power on again the driver to enter the code learning status should be 10s after last power-down)

Clear code operation

Clear code between the driver and remote control is for backing to factory default.

After clear code successfully, the driver can be controlled by anyone the same model remote control or the remote control not the same model but compatible with each other.

Step 1: Connect the driver with load LED(Without power on) 

Step 2: Pressing the key “Mode” and power on the driver, the load LEDs will be 50% brightness white as responding. Means entered the learning code/ clear code status successfully(No need to select the zone, remote control in any zone status can be used to clear code for drivers in any zones)

Step 3: Continuously to press the key “Brightness -” for 3 times within 5 seconds after step 2, the brightness of LEDs will change from 25%-10%-back to preset level. Code clearing successfully

If not, please re-operate from step 1 to 4.(Notice: Power on again the driver to enter the code learning status should be 10s after last power-down). Anyone the same model remote control or the remote control not the same model but compatible with each other can be used to clear code.

Notice:

1)Each driver can save 4 different RF codes ( it means each driver can be controlled by 4 different-code remote in the Max).If there is confusion,, more remote control all can control, just clear the code and then use the specified remote control re-code with the driver.

2)Anyone the same model remote control or the remote control not the same model but compatible with each other can be used to clear code.

5. Remote control accessories installation instructions

1)Remote control accessories list as below: 

Remote control rack 1pc3M foam sponge glue 1pcM4 double-headed self-tapping screw 1pcφ6 expansion tube 1pc
图片4.png图片5.png图片6.png图片7.png

2)Remote control rack installation instructions:

There are two different installation methods for the remote control rack, customers can choose to install according to the different situation;

☆The first installation method: free drilling installation (for flat no ash surface)

(1)First, tear off the protective film for one side of 3M foam sponge glue, then affixed it on the behind circle of the remote control rack;

(2)Tear off the protective film for other side of 3M foam sponge glue, and stick the remote control rack on the place where you want to stick.

(3)Hang the remote control on the rack after installation

QQ截图20170607140128.jpg

☆The second installation method: free drilling installation(suitable for uneven and ash surface)

(1) Drill a hole on the wall with a 6mm drill bit;

(2) Install the φ6 expansion tube in the hole;

(3)Twist the tip end of the M4 double-headed self-tapping screw into the expansion tube;

(4) Install the remote control rack on the screw like below

(5) Hang the remote control on the rack after installation

2.jpg


Product Categories

Fast Track

  • Feedback
    Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
    Tel: +86-755-27966554    
    Fax: 86-755-29707831    
    E-mail: hoionlighting@led-ctrl.com
Copyright © Shenzhen Hoion Lighting Co.,Ltd