Shenzhen Hoion Lighting Co.,Ltd
Home > News > Content
Discussion On Protection Best Practices For LED Circuits
Shenzhen Hoion Lighting Co.,Ltd | Updated: May 07, 2015

White-light LED part of the voltage-sensitive devices, is based in practical work to a maximum of 20mA of current, but most often due to the current increase when working with all kinds of reasons, if no protective measures are taken, this increased current exceeds a certain amount of time, and later LED damage.

LED the cause of the damage caused are as follows:

1, power supply voltage spike.

2, a component or printed in a line short circuit in lines, or other conductors to form a pathway LED power supply partial short-circuit, make this place the voltage increases.

3, an LED cause damage resulting in a short circuit because of their quality, its voltage drop will pass on to other LED.

4, lamp in the temperature is too high, so LED features gone bad.

5, lamp into the water, water is electrically conductive.

Previous: LED Lamp With Power Supply Used In The Project

Next: No Information

Product Categories

Fast Track

  • Feedback
    Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
    Tel: +86-755-27966554    
    Fax: 86-755-29707831    
Copyright © Shenzhen Hoion Lighting Co.,Ltd