Shenzhen Hoion Lighting Co.,Ltd
Products
RF 2.4G Multi Zone Dimming Remote(DIM)

RF 2.4G Multi Zone Dimming Remote(DIM)

1. Product photo 2. Product Feature 1 ) Product supply voltage is 3V(AAA*2) 2 ) Adopt 2.4G wireless control, with feature of long distance and non-directional control 3 ) Full keys design, unique interface, simple operation 4 ) Multi zone control function simple: could control single zone or...

Parameter

1. Product photo

图片1528.JPG

2. Product Feature

1Product supply voltage is 3V(AAA*2)

2Adopt 2.4G wireless control, with feature of long distance and non-directional control

3Full keys design, unique interface, simple operation

4Multi zone control function simple: could control single zone or overall zones; controlled area indicated by indicator light , more intuitive

5Hanging storage way, more easy to access and storage 

6Two ways for accessories installation, flexible choice

7Two Colors: Black/White

8RFBK-DIM-2.4G match with HD series dimming driver

9Three years warranty

3. Technical Parameters

Working temperature

-20-60

Working voltage

3V AAA*2PCS

Sleep current

<25uA

Emission current

<30mA

Sleep power consumption

<75uW

Emission power consumption

<90mW

Net weight

55g

Dimension

L148*W40*38 (mm)

RF distance

≤30m

RF frequency

2.4GHz

Accessories

Remote control rack, 3M foam sponge glue, M4 double-headed self-tapping screws, φ6 expansion tube, battery, manual

4. Direction for use

Each buttons function as below:

图片9.png 

 

Name of key

Description

ON

ON in any time

OFF

OFF in any time

Mode

3 Brightness Grades20%, 50%, 100%;

Brightness +

decrease light brightness, long press continuously 

Brightness -

Increase light brightness, long press continuously

CW balance key

5% brightness

Zone selection key

Select control zoneselected zone indication light will on, support single zone and overall zones control

RemarkShort press Zone Key, for single zone shift, selected zone indication light on. Long press Zone key for 3 seconds, select allover zones, 4 indication lights on in the meantime, control allover area lights.

 

Zone-setting 

Multi-zone remote control need to set the zone before using, that means match each driver to the corresponding group.

Matching Zone operation

Step 1Connect the driver with load LED(Without power on)

Step 2Select ZoneThrough pressing“Zone”key to light on the selected zone indication light;

Step 3Pressing “Mode Key” and hold on, power on the driverthe load LEDs will be 50% brightness as responding to enter match code/clear code stateNoticeStep 3 should be finished within 8 seconds after Step 2, indication light will off if no operation within 8 seconds;

Step 4Continuously to press the key “On” for 3 times within 5 seconds after step 3the brightness of LEDs will change from 25%-10%-back to preset level as responding;

If match code unsuccessfully, please re-operate above stepsNotice“Power on driver to enter match code/clear code state” should after at least 10 seconds from the last time power off.

 

Clear code operation

Clear code between the driver and remote control is for backing to factory default.

After clear code successfully, the driver can be controlled by anyone the same model remote control or the remote control not the same model but compatible with each other.

Step 1: Connect the driver with load LED(Without power on)

Step 2: Pressing the key “Mode” and power on the driver, the load LEDs will be 50% brightness white as responding. Means entered the learning code/ clear code status successfully(No need to select the zone, remote control in any zone status can be used to clear code for drivers in any zones)

Step 3:Continuously to press the key “Brightness -” for 3 times within 5 seconds after step 2, the brightness of LEDs will change from 25%-10%-back to preset level. Code clearing successfully

If not, please re-operate from step 1 to 4.Notice: Power on again the driver to enter the code learning status should be 10s after last power-down. Anyone the same model remote control or the remote control not the same model but compatible with each other can be used to clear code.

 

Notice

1Each driver can save 4 different RF codes ( it means each driver can be controlled by 4 different-code remote in the Max).If there is confusion,, more remote control all can control, you need to clear the code and then use the specified remote control re-code with the driver.

2Anyone the same model remote control or the remote control not the same model but compatible with each other can be used to clear code. 

5. Remote control accessories installation instructions

1Remote control accessories list as below: 

Remote control rack 1pc 

 3M foam sponge glue 1pc
图片10.png图片11.png
M4 double-headed self-tapping screw 1pc φ6 expansion tube 1pc
图片12.png图片13.png

 2Remote control rack installation instructions:

There are two different installation methods for the remote control rack, customers can choose to install according to the different situation;

The first installation method: free drilling installation (for flat no ash surface)

1First, tear off the protective film for one side of 3M foam sponge glue, then affixed it on the behind circle of the remote control rack;

图片14.png 

2Tear off the protective film for other side of 3M foam sponge glue, and stick the remote control rack on the place where you want to stick.

3Hang the remote control on the rack after installation

QQ截图20170606162308.png

   The second installation method: free drilling installation(suitable for uneven and ash surface)

(1) Drill a hole on the wall with a 6mm drill bit;

(2) Install the φ6 expansion tube in the hole;

(3)Twist the tip end of the M4 double-headed self-tapping screw into the expansion tube;

图片15.png 

(4) Install the remote control rack on the screw like below

(5) Hang the remote control on the rack after installation

     QQ截图20170606162334.png              

 

 


Hot Tags: rf 2.4g multi zone dimming remote(dim), manufacturer, supplier, factory, company
Related Products

Product Categories

Fast Track

  • Feedback
    Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
    Tel: +86-755-27966554    
    Fax: 86-755-29707831    
    E-mail: hoionlighting@led-ctrl.com
Copyright © Shenzhen Hoion Lighting Co.,Ltd