Shenzhen Hoion Lighting Co.,Ltd
Products
RF 20 Key LED RGB Controller

RF 20 Key LED RGB Controller

Controller adopts the advanced micro control unit, it is used for controlling a variety of LED light. For instance, point source of light, flexible light strip, wall washer lamp and so on. It has many advantages such as good appearance, easy connection and simplicity to use. Adopts RF 20 key...

    Controller adopts the advanced micro control unit, it is used for controlling a variety of LED light. For instance, point source of light, flexible light strip, wall washer lamp and so on. It has many advantages such as good appearance, easy connection and simplicity to use. Adopts RF 20 key remote control to ON/OFF, choose colors, change dynamic modes.

    Product Features:

     ● Designed for RGB constant voltage LED lights, Max.output:3*6.6A.

     ● Working voltage DC12-24V, it can be universal in this range.

     ● Adopts PWM digital technology, signal frequency: 107Hz.

     ● RF 20-key wireless remote, RF frequency: 433.92MHz.

     ● 14 modes in total, including 8 static colors and 6 dynamic changes.

     ● Warranty of this product is one year, exclude the artificial situation of damaged or overload working.
     

    Technical Parameters

    Controller


    Working temperature-20-60℃Supply voltageDC12V-24V
    Static power consumption<1WConnecting modecommon anode
    Grayscale64 levels(RGB each)Speed stage100 grade
    External dimensionL80×W64×H24mmPacking sizeL106ΧW64ΧH56 mm
    Net weight95gGross weight115g
    Output3 channelsOutput current≤6.6A(each channel)
    Mode14Remote distanceUp to 20M
    PWM frequency433.92MhzMemory functionsupport
    Max. Output power12V:<240W,  24V:<480W

    Remote control

    Working temperature-20℃~60℃Supply voltageDC3V(CR2025)
    Standby current<3.3uAWorking current<12mA
    Standby power9.9uWWorking power36mW
    Net weight24gRF frequency433.92MHz
    External dimensionL85*W51*H6mmRF distance≤20m

    Interface Specifications


    Direction for use

     ● Connect the load wire and sync-signal cable at first, following by the power wire.

     ● Ensure short circuit can not occur before you turn on the power.

     ● Adopt RF wireless remote control, 20 keys in total, function of each button as below:


    Brightness +Brightness -pauseon/off
    Static redStatic greenStatic blueStatic white
    Static orangeStatic yellowStatic cyanStatic purple
    Auto runthree base color jumpyThree color gradually changespeed +
    Flashseven base color jumpySeven color gradually changespeed-

    RF CODE

    Receiver can be controlled by any one the same remote as factory default; remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

    Matching code operation

    Receiver and Remote Control are coded as default, matching them before using,if unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:

    1.Step 1: Pressing key “FLASH” and hold on, power on the controller, the load LEDs will be 50%  brightness white as responding.

    2.Step 2: Pressing “FLASH” 3times in 3 seconds ,corresponding to the operation, the LED’s brightness will change as 25%-10%-back to preset level.

    3.Code learning successfully, the receiver only can be controlled by the remote.

    4.If not, please re-operate from step 1 to 2.

     

    Clear code operation

    Back to factory default, wall-panel can be controlled by any one the same remote control.

    1.Step 1: Pressing key “JUMP7” and hold on, power on the controller, the load LEDs will be 50%  brightness white as responding.

    2.Step 2: Pressing “JUMP7” 3times in 3 seconds ,corresponding to the operation, the LED’s brightness will change as 25%-10%-back to preset level.

    3.Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be controlled by any remote control.

    4.If not, please re-operate from step 1 to 2.

    Typical Applications

    Product information for placing order


    Product nameItem number
    RF 20keys remote controllerHX-RGB4-RF20K


    Hot Tags: rf 20 key led rgb controller, manufacturer, supplier, factory, company

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd