Shenzhen Hoion Lighting Co.,Ltd
Products
You are here: Home > Products > LED Dimmer
Wall Mounted Led Dimmer

Wall Mounted Led Dimmer

HX-SZ600-WP86-DIM LED Sync Dimmer with RF button remote HX-SZ600-WP86-DIM adopts the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. For instance, point source of light, flexible light strip, led modules, led strings and so...

    HX-SZ600-WP86-DIM
    LED Sync Dimmer with RF button remote
    HX-SZ600-WP86-DIM adopts the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. For instance, point source of light, flexible light strip, led modules, led strings and so on. Belong to low-voltage DC power input and output with two interfaces, including V+ is the positive interfaces, the other three for the negative interface. Meanwhile, you can turn on/off, adjust brightness for different lighting effects through full-touch wall panel remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.

    Product Feature

    ●Designed for single color constant voltage LED lights, Working voltage DC12-24V.
    ●Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.
    ●Adopts full-touch wall panel remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters. The working voltage of wall-panel is AC90-265V.
    ●Structure/dimension/installation of the wall panel according to the 86-type European standards.
    ●Memory function, each time power-on reserve the mode which stop in the last power-down.
    ●Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
    ●Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
    ●Warranty of this product is one year, exclude the artificial situation of damaged or overload working.

    Technical Parameters

    Controller

    Working temperature

    -20-60℃

    Supply voltage

    DC12V-24V

    Static power consumption

    <1W

    Mode

    3

    Grayscale

    256 levels

    Speed stage

    100 grade

    External dimension

    L91*W88*H24 mm

    Packing size

    L102*W102*H66 mm

    Net weight

    280g

    Gross weight

    300g

    Output

    3 channels

    Output current

    ≤8A(each channel)

    Output power

    288W/12V; 576W/24V

    RF distance

    ≤20m

    PWM frequency

    433.92Mhz

    Memory function

    support

    Remote control

    Ambient temperature

    0-45℃

    Working voltage

    AC90-265V(50/60Hz)

    Standby power

    0.2W

    Working power

    2W

    Net weight

    130g

    RF frequency

    433.92MHz

    Dimension

    86*86*34mm

    RF distance

    ≤20m

    Structure

    86-type European standard

    Interface Specifications

    Connection:V+→COM、CH1→V-、CH2→V-、CH3→V-;

    Direction for use
    ●Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;
    ●Adopts RF full touch wall-panel remote control, with one dimming ring and 5 function buttons.
    ●The signal light flash-- represents the signal has been sent well;
    The function of buttons are shown as below:

    3 modes in total as below:

    NO

    Patterns

    Remarks

    1

    Static 100% light

    Brightness is adjustable

    2

    flash

    Speed is adjustable

    Tips: Receiver can be controlled by any one the same remote as factory default; the wall-panel remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.


    Matching code operation

    If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:

    1.Step 1: Pressing key "mode" and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
    2.Step 2: Continuously to press the key "ON" for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.
    3.Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.
    4.If not, please re-operate from step 1 to 2.

    Typical Applications

    Power and LED's connection diagram:

    Conjunction diagram :


    Product information for placing order

    Product name

    Item number

    LED Sync Dimmer with RF button remote

    HX-SZ600-WP86-DIM

    Hot Tags: Wall Mounted Led Dimmer,LED Dimmer

    Product Categories

    Fast Track

    • Feedback
      Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
    • Quick Navigation
    • Contact Us
      Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
      Tel: 86-755-27966554    
      Fax: 86-755-29707831    
      E-mail: hoionlighting@led-ctrl.com
    Copyright © Shenzhen Hoion Lighting Co.,Ltd