Shenzhen Hoion Lighting Co.,Ltd
Products

ws2811 led controller ic Ws2811 LED Controller

Product Description HX-GYSPI is suit for UCS1903 (TM1804 etc) output applications which drive LED directly. It is widely used in advertising, stage sets, home decorations, etc. It has many advantages such as low price, easy connection and simplicity to use, especially integrated power supply....

Product Description
HX-GYSPI is suit for UCS1903 (TM1804 etc) output applications which drive LED directly. It is widely used in advertising, stage sets, home decorations, etc. It has many advantages such as low price, easy connection and simplicity to use, especially integrated power supply. It has memory function. And adopt IR remote control, could adjust brightness, static color choices and various dynamic changes in lighting effects. There are 143 modes in total.

Technical Parameters

Working temperature

-20-60℃

Input voltage

AC90-265V

Output voltage

DC12V

Output current

≤3A

Output power

≤36W

Static consumption

<1W

External dimension

L148*W54*H33(mm)

Packing size

L183*W82*H60(mm)

Net weight

260g

Gross weight

300g

Effects model

143

Control A01 strip length range

5meters in max

Controlled IC Model

Such as the TM1803, TM1804, TM1809 , TM1812, UCS1903 etc. (specify the required model in orders)

Features
1、Integrated power supply,input voltage:AC90-265V, output: DC12V/3A;
2、compatible with HX-A01(contact HOION for more information),limited by the power supply, the max is 5meters;
3、Adopt IR 18-key remote control, mode/speed/IC number are adjustable;
4、Memory function ;
5、143 modes in total, including horse racing, running water, tailing, brush color, scanning, raindrops, and etc.
6、When adjusting speed, press the button and hold, rapid bursts of adjustment.

Interface Specifications

Direction for using
●Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before turn on the power;;
●IR remote operate by sending a signal from the remote control to the IR receiver via line-of-sight, and IR signals can't travel through obstructions, so IR remote control needs to be about to "see" the IR receiver and make sure there is no obstructions between them;
●Controlling IC number setting: turn on the power, turn off the controller through remote control (LED strip would all off) ; press "RESET" goes into setting IC number (led strip would light green). Using "Bright UP/DOWN" to add/reduce IC number, each pressing add/reduce one IC (the appropriate length of led strip would light green). Turn on the controller when finish the setting. The factory default setting is 50 ICs (5 meters).
Tip: limited by the power supply, it's max output is 5meters;Additional power supply is needed for more meters.
●The function of each button as below:

ON


OFF

Mode+

Speed+

Brightness+

Mode-

Speed-

Brightness-

Redmodes group

Green modes group

Blue modes group

Yellow modes group

Cyan modes group

Purple modes group


White modes group


Auto

Pause

Colored modes group

Mode table as below:

Red modes group

NO.

Mode description

NO.

Mode description

1

Static red

2

Red horse race lamp to left direction

3

Red horse race lamp to right direction

4

Red background scan lamp back-for-ward direction

5

Red water move to right direction

6

Red water move to left direction

7

Red trail to left single direction

8

Red trail to right single direction

9

Red water trail to right direction

10

Red trail to left double direction

11

Red trail to right double direction

12

Red draw curtain

13

Red overlay to right direction

14

Red overlay to left direction

15

Red stroboflash

16

Sub red overlay to single direction

17

Red overlay from middle to both sides



Green modes group

NO.

Mode description

NO.

Mode description

1

Static green

2

Green horse race lamp to left direction

3

Green horse race lamp to right direction

4

Green background scan lamp back-for-ward direction

5

Green water move to right direction

6

Green water move to left direction

7

Green trail to left single direction

8

Green trail to right single direction

9

Green water trail to right direction

10

Green trail to left double direction

11

Green trail to right double direction

12

Green draw curtain

13

Green overlay to right direction

14

Green overlay to left direction

15

Green stroboflash

16

Sub green overlay to single direction

17

Green overlay from middle to both sides



Blue modes group

NO.

Mode description

NO.

Mode description

1

Static blue

2

Blue horse race lamp to left direction

3

Blue horse race lamp to right direction

4

Blue background scan lamp back-for-ward direction

5

Blue water move to right direction

6

Blue water move to left direction

7

Blue trail to left single direction

8

Blue trail to right single direction

9

Blue water trail to right direction

10

Blue trail to left double direction

11

Blue trail to right double direction

12

Blue draw curtain

13

Blue overlay to right direction

14

Blue overlay to left direction

15

Blue stroboflash

16

Sub blue overlay to single direction

17

Blue overlay from middle to both sides



Yellow mode group

NO.

Mode description

NO.

Mode description

1

Static yellow

2

Yellow horse race lamp to left direction

3

Yellow horse race lamp to right direction

4

Yellow background scan lamp back-for-ward direction

5

Yellow water move to right direction

6

Yellow water move to left direction

7

Yellow trail to left single direction

8

Yellow trail to right single direction

9

Yellow water trail to right direction

10

Yellow trail to left double direction

11

Yellow trail to right double direction

12

Yellow draw curtain

13

Yellow overlay to right direction

14

Yellow overlay to left direction

15

Yellow stroboflash

16

Sub yellow overlay to single direction

17

Yellow overlay from middle to both sides



Cyan mode group

NO.

Mode description

NO.

Mode description

1

Static cyan

2

Cyan horse race lamp to left direction

3

Cyan horse race lamp to right direction

4

Cyan background scan lamp back-for-ward direction

5

Cyan water move to right direction

6

Cyan water move to left direction

7

Cyan trail to left single direction

8

Cyan trail to right single direction

9

Cyan water trail to right direction

10

Cyan trail to left double direction

11

Cyan trail to right double direction

12

Cyan draw curtain

13

Cyan overlay to right direction

14

Cyan overlay to left direction

15

Cyan stroboflash

16

Sub cyan overlay to single direction

17

Cyan overlay from middle to both sides



Purple mode group

NO.

Mode description

NO.

Mode description

1

Static purple

2

Purple horse race lamp to left direction

3

Purple horse race lamp to right direction

4

Purple background scan lamp back-for-ward direction

5

Purple water move to right direction

6

Purple water move to left direction

7

Purple trail to left single direction

8

Purple trail to right single direction

9

Purple water trail to right direction

10

Purple trail to left double direction

11

Purple trail to right double direction

12

Purple draw curtain

13

Purple overlay to right direction

14

Purple overlay to left direction

15

Purple stroboflash

16

Sub purple overlay to single direction

17

Purple overlay from middle to both sides



White mode group

NO.

Mode description

NO.

Mode description

1

Static white

2

White horse race lamp to left direction

3

White horse race lamp to right direction

4

White background scan lamp back-for-ward direction

5

White water move to right direction

6

White water move to left direction

7

White trail to left single direction

8

White trail to right single direction

9

White water trail to right direction

10

White trail to left double direction

11

White trail to right double direction

12

White draw curtain

13

White overlay to right direction

14

White overlay to left direction

15

White stroboflash

16

Sub white overlay to single direction

17

White overlay from middle to both sides



Colored mode group

NO.

Mode description

NO.

Mode description

1

Seven color jumpy change

2

Seven color scan lamp back-for-ward direction

3

Seven color cycling water move to right direction

4

Seven color breathing lamp back-for-ward direction

5

Seven color jumping trail to left single direction

6

Seven color jumping trail to right single direction

7

Seven color gradually change

8

Full color wave to right direction

9

Seven color water move to left direction

10

Colorful switch

11

Seven color overlay to left and right direction

12

Seven color background overlay to double direction

13

Seven color overlay from middle to both sides

14

Seven color background overlay middle to both sides

15

Sub seven color move back-for-ward direction

16

Sub seven color jump and move back-for-ward

17

Sub seven color background move back-for-ward

18

Sub seven color spread back-for-ward

19

Sub seven color water move to left and right

20

Sub seven color spread from middle to both sides

21

Sub seven color stretch from middle to both sides

22

Sub seven color stretch to single direction

23

Sub seven color overlay to single direction



Typical Applications

Notes
1. Supply voltage of this product is AC85V-256V, never connect to others power supply.
2. Before using the infrared remote, the insulating film should be removed.
3. Lead wire should be connected correctly according to grade that connecting diagram offers.
4. This product is not to overload;
5. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.

Common Problems

Problems

Possible cause

Solution

1.Lamp does not light after power


Power cord is not properly connected, or there is not output switching power supply

Connect the power cord properly or replay the power

Lamp power cord is not connected or short circuit

Connected lighting power cord

2. After connecting some of the load the controller does not work

The connected load is too large,so that it has burned in some of the components of the controller

Replace parts of components or replace the controller

3. After connecting to power the controller is working properly,but remote control can not work

1. The blank on the button cell of remote controller did not pulled out 2. the remote controller do not target the receiver

1.Take away the transparent blank 2.Target the remote controller to the receiver


Hot Tags: ws2811 led controller ic,ws2811 led controller, manufacturer, supplier, factory, company

Product Categories

Fast Track

  • Feedback
    Shenzhen Hoion Lighting Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 6-7F, Huichuan Science And Technology Park, Xiangyin Road, Nanlian, Longgang, Shenzhen, China
    Tel: +86-755-27966554    
    Fax: 86-755-29707831    
    E-mail: hoionlighting@led-ctrl.com
Copyright © Shenzhen Hoion Lighting Co.,Ltd